Ambient Dust Monitor PM 10 & PM 2.5

 

 

Particulate matter contaminates our atmosphere in various ways. It can for instance be generated by different industrial production processes,waste combustion, coal mining or automobile exhausts. The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Each hour, a small carbon-14 element emits a constant source of high-energy electrons (known as beta rays) through a spot of clean fillter tape. These beta rays are detected and counted by a sensitive scintillation detector to determine a zero reading. The APDA-371 automatically advances this spot of tape to the sample nozzle, where a vacuum pump then pulls a measured and controlled amount of dust-loaded air through the filter tape. Hourly this dirty spot is placed back between the beta source and the detector thereby causing an attenuation of the beta ray signal which is used to determine the mass of the particulate matter on the filter tape.

csm_APDA-371_a8cca32fa0

Product Features

  1. Type Approval according EN 12341 (PM 10)

  2. Type Approval according EN 14907 (PM 2.5)

  3. 2 months automatic operation without maintenance

  4. Low operating costs

  5. Hourly check of Zero point, Span point (foil) and drift

  6. No annual calibration necessary

  7. High accuracy and reliability

  8. Hourly filter change reduces the loss of volatile particles

  9. No geographical or seasonal corrections necessary

  10. Sophisticated heating technology controls relative humidity in the sampling phase

  11. Internal memory stores digital data up to 182 days

  12. Data retrieval via RS232 or LAN using a PC, modem, printer or data acquisition system